空间光学遥感器主镜背部形状的选择

本文阐述了空间光学遥感器中主镜轻量化的必要性．对双凹、平背、单拱和双拱4种形状主镜在重力载荷下的变形进行了分析计算，得出了背部3点支撑方式下双凹主镜最优的结论，并进一步研究了3点支撑的双凹主镜面形变化RMS值随规一化支撑半径r／R的变化规律．     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Kinetic Monte Carlo Simulation of EB-PVD Film:Effects of Substrate Temperature

The 2D kinetic Monte Carlo (KMC) simulation was used to study the effects of different substrate temperatures on the microstruc-ture of Ni-Cr films in the process of deposition by the electron beam physical vapor deposition (EB-PVD). In the KMC model, substrate was assumed to be a “surface” of tight-packed rows, and the simulation includes two phenomena: adatom-surface collision and adatom diffusion. While the interaction between atoms was described by the embedded atom method, the jumping energy was calculated by the molecular static (MS) calculation. The initial location of the adatom was defined by the Momentum Scheme. The results reveal that there exists a critical substrate temperature which means that the lowest packing density and the highest surface roughness structure will be achieved when the temperature is lower than the smaller critical value, while the roughness of both surfaces and the void contents keep decreasing with the substrate temperature increasing until it reaches the higher critical value. The results also indicate that the critical substrate temperature rises as the deposition rate increases.     

功率谱密度(PSD)在评价超精密光学表面中的应用研究

用原子力显微镜对不同工艺下获得的超光滑反射镜基片进行了功率谱密度(PSD)检测,并对结果进行分析,以指导光学元件加工。     

栅极偏压对纳米金刚石薄膜沉积过程的影响

在HFCVD系统中施加栅极偏压和衬底偏压,采用双偏压成核和栅极偏压生长的方法成功制备了高质量的纳米金刚石薄膜.采用显微Raman高分辨率SEM和AFM等现代理化分析手段分析纳米金刚石膜的微结构,结果表明双偏压显著促进了金刚石的成核密度,平均晶粒尺寸在20 nm以内.试验观察和理论分析表明栅极偏压促进了热丝附近的等离子体浓度,提高了衬底附近的碳氢基团和氢原子浓度,提高了金刚石的成核密度、在保持晶粒的纳米尺寸的同时保持了较高的成膜质量和较低的生长缺陷.     

光学基片表面软质抛光胶体粒子的激光清洗

介绍了光学基片表面软质抛光胶体粒子激光清洗的基本方法、原理和实验装置,并通过对含有污染微粒的基片表面进行激光清洗,获得了高洁净表面的光学基片.     

高精度YAG超平光学基片高效范成法超精磨削的研究

随着YAG新型显示材料制成的高清晰度电视即将投放市场，使得YAG光学基片的批量生产和成本问题面临严峻考验．为了保证产品质量和企业生产效益，提出了大直径高精度YAG光学基片范成法超精磨削的设想．通过实验验证表明，该方法不仅能高效高质量生产合格的YAG光学基片，大幅度降低制造成本，而且为该方法在其它光学材料加工上的应用也奠定了基础．     

不锈钢镜面的游离磨粒精密加工

利用游离磨粒加工方法对马氏体平面不锈钢SUS440C试件进行精密加工.通过田口实验方法对研磨阶段的工艺参数进行了优化,涉及的工艺参数包括研磨盘转速、加工载荷和加工时间.利用优化的研磨工艺加工后试件表面粗糙度达Ra72nm.抛光过程中使用聚氨酯抛光垫和二氧化硅磨粒,经抛光后试件表面粗糙度达Ra8nm、表面呈镜面.     

碳/环氧复合材料两次表面镜基板研制

文章介绍了碳/环氧复合材料两次表面镜基板的结构与铺层、选材与成型工艺,性能测试等内容。     

大口径反射镜在平行光管中的安装方法

文章介绍了3种平行光管中大口径反射镜的安装方法，并通过力学分析进行比较，给出了各自的优缺点。